[W4FHU] Last nights meeting and a correction to the plans.
Joel at Cyberbest.com
Fri Aug 21 16:45:29 CDT 2009
It was great to see everyone so involved with the project at last nights
meeting. When people ignore all the great snacks to stay building their
project, I consider it a success.
It has been brought to my attention that there could be a problem in the
instructions for the red wires placement. The red wire goes between the
common radio ground , using say hole K-12 to hole P-13 - The chip. The
early directions on-line said a different hole. The bottom line is the red
wire jumper HAS to end up at pin 4 of the chip. So you need to use pin P-13
to have it come out right next to the chip's bottom left-hand most pin (When
viewed from the bottom) The picture is correct.
>From the bottom, the chip counts clockwise as:
The website will have any updates to the instructions.
Joe Loucka AG4QC
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the w4fhu